spec no: dsao2064 rev no: v.1b date: mar/17/2015 page: 1 of 7 approved: wynec checked: allen liu drawn: q.m.chen er p: 1203013273 3.2mmx3.6mm full-color surface mount led lamp attention observe precautions for handling electrostatic discharge sensitive devices part number: APF3236SEEZGKQBKC hyper red green blue features z 3.2mmx3.6mm smt led, 1.1mm thickness. z low power consumption. z one red, one green and one blue chips in one package. z package : 1000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. descriptions z the hyper red source color devices are made with algainp on gaas subs trate light emitting diode. z the green source color devices are made with ingan on sapphire light emitting diode. z the blue source color devices are made with ingan on sapphire light emitting diode. z electrostatic discharge and power surge could damage the leds. z it is recommended to use a wrist band or anti- electrostatic gl ove when handling the leds. z all devices, equipments and machineries must be electrically grounded. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3.the specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.the device has a single mounting surface. the device must be mounted according to the specifications.
spec no: dsao2064 rev no: v.1b date: mar/17/2015 page: 2 of 7 approved: wynec checked: allen liu drawn: q.m.chen er p: 1203013273 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. 3. luminous intensity value is traceable to the cie127-2007 compliant national standards. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2.forward voltage: +/-0.1v. 3.wavelength value is traceable to the cie127-2007 compliant national standards. 4.excess driving current and/or operating temperature higher t han recommended conditions may result in severe light degradation or premature failure. notes: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. 2 1/2 APF3236SEEZGKQBKC hyper red (algainp) water clear 80 140 green (ingan) 200 330 blue (ingan) 40 70 120 symbol parameter device typ. max. units test conditions peak peak wavelength hyper red green blue 630 515 460 nm i f =20ma d [1] dominant wavelength hyper red green blue 621 525 465 nm i f =20ma ? 1/2 spectral line half-width hyper red green blue 20 30 25 nm i f =20ma c capacitance hyper red green blue 25 45 100 pf v f =0v;f=1mhz v f [2] forward voltage hyper red green blue 2 3.3 3.3 2.5 4.1 4 v i f =20ma i r reverse current hyper red green blue 10 50 50 ua v r =5v parameter hyper red green blue units power dissipation 75 102.5 120 mw dc forward current 30 25 30 ma peak forward current [1] 195 150 150 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsao2064 rev no: v.1b date: mar/17/2015 page: 3 of 7 approved: wynec checked: allen liu drawn: q.m.chen er p: 1203013273 APF3236SEEZGKQBKC hyper red
spec no: dsao2064 rev no: v.1b date: mar/17/2015 page: 4 of 7 approved: wynec checked: allen liu drawn: q.m.chen er p: 1203013273 green
spec no: dsao2064 rev no: v.1b date: mar/17/2015 page: 5 of 7 approved: wynec checked: allen liu drawn: q.m.chen er p: 1203013273 blue
spec no: dsao2064 rev no: v.1b date: mar/17/2015 page: 6 of 7 approved: wynec checked: allen liu drawn: q.m.chen er p: 1203013273 APF3236SEEZGKQBKC reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsao2064 rev no: v.1b date: mar/17/2015 page: 7 of 7 approved: wynec checked: allen liu drawn: q.m.chen er p: 1203013273 packing & label specifications APF3236SEEZGKQBKC terms and conditions for the usage of this document 1. the information included in this docum ent reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the dat asheet. if customer usage exceeds the spec ified limits, kingbright will not be respon sible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applicati ons. if customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes
|
